Description
Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
For more detailed information please look at the English user’s manual: A160_man.pdf
Similar modules:
A-152 Voltage Addressed Track&Hold / Switch (Multiplexer) / Digital Outputs
A-161 Clock/Trigger Sequencer
A-160-2 Clock Divider II
A-160-5 Clock Multiplier
Das Modul wurde von A-160 in A-160-1 umbenannt um es von den anderen Modulen der A-160-Serie (A-160-2, A-160-5) besser unterscheiden zu können.
Module A-160 has been renamed to A-160-1 to distinguish it better from other modules of the A-160 series (e.g. A-160-2, A-160-5).
Width: 4 HP / 20.0 mm
Depth:: 40 mm (measured from the rear side of the front panel)
Current: +40mA (+12V) / -0mA (-12V)
Reviews
There are no reviews yet.